Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for North Las Vegas Homeowners
One room with a dull, scratched floor can make the whole house feel worn, and replacement is often the wrong answer. Hardwood floor refinishing restores the wood you already own: we sand back the old finish, stain to the tone you want, and seal it, and most solid floors come back looking new. Our technicians have up to 11 years of experience, and we handle sanding, staining, buffing, recoating, restoration and stair work as one job rather than sending you to a separate shop. Call (888) 393-9180. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Hardwood Floor Refinishing Service Includes
Refinishing is not one task, it’s a set of them, and which ones a floor needs depends on how much wear it has and how thick the wood is. Here’s what each part of the work covers.
Hardwood Floor Sanding
Sanding strips the old finish and levels the surface so the new coat has something sound to bond to. You need it when a floor is worn through in traffic lanes, cupped at the edges or covered in hairline scratches that no cleaner will lift. We sand with dust containment in mind, working room by room so the rest of the house stays livable while the job moves along. The sanding depth is checked against the thickness of the wood before we start, and on some floors the honest answer is that there isn’t enough left to sand.

Hardwood Floor Staining
Staining sets the color of the finished floor, from a pale natural tone to a deep walnut, and it’s the step that changes the character of a room most. You need staining when you’re refinishing anyway and want a different look, or when a repair patch has left lighter or darker wood that won’t blend on its own. We work through stain options at the estimate and test how they read against your wood, your lighting and your cabinets. Stain takes differently on different species, so the sample board is a guide; the final floor is what the wood gives us.

Hardwood Floor Restoration
Restoration is refinishing for floors that have more going on than surface wear: water staining, deep dents, gaps, loose boards or damage left by a heavy piece of furniture. You need it when a floor looks too far gone to save but is still structurally worth keeping. We assess what’s repairable at the estimate visit and tell you plainly when a section should be replaced rather than sanded out. Restoring before you replace saves the material and keeps the original wood that gives a North Las Vegas home its character.

Hardwood Floor Buffing
Buffing is a light abrasion that refreshes the top layer of finish and smooths scuffs and dull patches. It suits floors whose finish is tired but still intact, and it’s a smaller commitment than a full sand. We check that the finish is sound enough to buff first, because buffing over a failing finish just spreads the problem. Where a floor only needs this, we say so instead of quoting a full refinish.
Screen and Recoat Hardwood Floors
A screen and recoat takes the top coat back lightly and lays down fresh finish without sanding down to bare wood. It’s the right call when the color is still what you want and the wear is in the finish, not the timber. We look for scratches that disappear with a wipe of the finger: if they don’t, the wood itself is marked and a recoat won’t fix it. This is the least disruptive option we offer, and it keeps furniture moving to a minimum.
Stair Refinishing
Stairs need refinishing when the treads are worn down the center from years of foot traffic and the finish has gone gray or sticky. They’re a different job from floors because of the nosing, the risers, the balusters and the tight spaces a sander can’t reach. We refinish treads, risers and handrails as part of the wider job so the stairs finish consistent with the rooms around them. If you’re working through a whole-house project, we also handle Floors North Las Vegas across the same visit.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
Refinishing works on the floor that’s already in your home, whatever label is on the box it came from, and we’re familiar with how the products we work alongside behave in this climate. Shaw and Mohawk both make hardwood and resilient lines that show up in North Las Vegas homes, and we’ve seen how their factory finishes wear and where they dull first, which tells us whether a recoat will hold or the floor needs a full sand. Pergo floors and the LVP products we install, like COREtec, sit next to hardwood in open-plan homes, and matching the finish of a new floor to refinished wood is a common request we’re comfortable handling.
We don’t sell or stock parts for any brand, and we’re not a dealer; our role is to service the floor you own and to install new product when restoring isn’t the right call. Whether you have Shaw under the living room and something else under the hall, or a floor you can’t identify at all, we can help. We also work alongside our North Las Vegas service area and our Las Vegas coverage and our Sunrise Manor coverage, so a multi-room project stays with one specialist.
Signs You Need Hardwood Floor Refinishing Right Now
- Dull patches in traffic lanes. The finish wears first where feet land, and once it’s gone the wood underneath starts to take on dirt. A floor that looks flat and gray in a path from door to kitchen is usually a refinish candidate rather than a replacement.
- Scratches that don’t fade with a wipe. Surface scuffs are finish damage and can be buffed out; scratches that stay visible after a damp wipe have reached the wood. Catching them now saves sanding depth later, and it’s the difference between a recoat and a full refinish.
- Cuping or lifting at board edges. Edges that curl up mean moisture has been moving through the floor, often from a leak or a humid stretch. It’s worth checking the cause before any sanding, because sanding a cupped floor flat without fixing the source just repeats the problem.
- Dark water stains or rings. Staining from spills and leaks sits deeper than surface wear and won’t come out with a cleaner. Restoration sanding can often lift it; if the wood is stained all the way through, we’ll tell you which boards need replacing.
- Floors that feel rough or catch on socks. A finish that has broken down leaves the grain exposed, and it collects grit and feels gritty underfoot. That roughness is a sign the protective layer is gone, which is the point to act rather than wait.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and estimate. We walk the floors with you, note the species, check for cupping and staining, and look at the thickness of the wood to judge whether sanding is viable. You get a written price before anything moves.
- 2
Book the install day. Refinishing is a scheduled job, so we book a day that suits you and talk through how much furniture needs to move and how long the house is out of action. The schedule gets set at the estimate.
- 3
Sanding and prep. We sand back to bare wood, handle repairs and gaps where needed, and vacuum down the surface. Dust containment is part of the plan, not an afterthought.
- 4
Stain and seal. We test the stain on the actual wood, then apply coats and let them cure properly between passes. Cure and dry times depend on the product and the conditions in the home, and the product instructions set them.
- 5
Walkthrough and care advice. We walk the finished floor with you, point out anything worth noting, and leave you with clear care guidance for the finish used. If anything needs a second look, that’s a call to us.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in North Las Vegas?
A typical hardwood floor refinishing project in North Las Vegas runs $1,675 – $4,650, and that’s the installed price for a space of roughly 500 to 800 square feet. Prices are estimates, and the written estimate from a visit sets the final number.
| Scenario | Typical estimated range |
|---|---|
| Refinishing a 500 – 800 sq ft floor | $1,675 – $4,650 |
| Screen and recoat (finish intact) | Lower end of that range |
| Full sand, stain and seal | Middle to upper end |
| Restoration with repairs and stain | Upper end |
| Stair refinishing alongside floors | Quoted per set of stairs |
Per square foot, hardwood refinishing starts from about $3, and the final figure depends on the product, the room and what’s underfoot. What moves the price: the square footage, how much sanding the floor needs, whether you want a stain or a natural finish, repairs like loose boards or water damage, and whether stairs are included. You avoid overpaying by getting a written, itemized estimate that lists sanding, staining, cleanup and any repairs separately, and by having us confirm at the visit that the wood is thick enough to refinish. Our free estimate includes the measure, an honest assessment of whether refinishing will work on your floor, and a written price.
Hardwood Floor Refinishing Near North Las Vegas – Our Service Area
We cover North Las Vegas and the surrounding valley, including Las Vegas, Sunrise Manor, Winchester, Whitney, Paradise, Spring Valley, Summerlin, Henderson, Enterprise, Boulder City and Moapa Town. Outlying spots like Moapa Town are a longer drive, so we plan those visits around the estimate schedule rather than promising a window. Closer in, response times are quick, and we’ll give you a straight answer on timing when you call. We’ll also talk through how a refinish pairs with carpet installation or tile flooring installation if you’re doing more than one room.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in North Las Vegas
Hardwood floor refinishing is the process of sanding back the worn finish on an existing wood floor, staining or sealing it, and bringing the surface back to a fresh look. It restores the floor you already have instead of replacing it, which keeps the original wood and saves the cost of new material. It isn’t the same as installation: no new boards go down unless a section is damaged beyond repair. Call (888) 393-9180 for a free estimate on your floor.
The length of the job depends on square footage, how much sanding the floor needs and how many coats the finish requires, so we set the schedule at the estimate rather than guessing on the phone. Refinishing is a booked job: a free in-home measure and written price first, then an install day. Cure and dry times between coats depend on the product and the conditions in the home.
Typical hardwood floor refinishing in North Las Vegas runs $1,675 – $4,650 for a 500 – 800 square foot project, with per-square-foot pricing starting from about $3. The final figure depends on the size of the area, the condition of the floor, the stain choice and any repairs or stair work. The written estimate sets the price, and estimates are free. Call (888) 393-9180 for an exact quote.
Yes, we refinish and restore hardwood from Shaw, Mohawk and other lines, and we know how factory finishes on those products tend to wear. Refinishing doesn’t depend on the brand label; it depends on the wood’s thickness and condition, which we check at the visit. Call (888) 393-9180 to get a floor assessed.
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Refinishing itself is scheduled rather than same-day, because we measure and price first, then book the work.
We don’t publish a specific warranty term, so ask at the estimate and we’ll explain what’s covered for your job in writing. The finish manufacturer’s instructions for the product used also matter, and we’ll point you to them. The written estimate is the document that sets out the terms.
Clear the furniture from the rooms being refinished and remove anything fragile from nearby surfaces, since fine dust can travel. Keep pets and foot traffic off the floors during sanding and while finishes cure. We’ll walk through the details when we book your install day, and you can call (888) 393-9180 with any questions beforehand.
Schedule Your Hardwood Floor Refinishing Service in North Las Vegas Today
If your floors are dull, scratched or stained, a refinish can save the wood you already have and skip the cost of replacement. Call (888) 393-9180 to schedule a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll measure, assess the floor and put a written price in your hands before any work begins.
Written by the team at Floors North Las Vegas.